The solution to noise generated by plastic processing equipment

Why does plastic processing equipment produce noise when it works

Reason one: hydraulic oil is insufficient. If there is not enough hydraulic oil in the tank of small plastic processing equipment, it is easy for the oil pump to absorb external air, or it is easy to absorb some dirt to cause the blockage of the oil pump. This is like adding fuel to the fire, making the lack of oil more serious, and also making the bubbles in the oil have an impact on the blades, and the noise will naturally occur. What’s the solution to this situation?  We need to check the amount of oil to avoid air and dirt.

Reason two: high viscosity. The viscosity referred to here is actually mainly hydraulic oil. If the viscosity of hydraulic oil is high, the resistance brought by the flow process is also relatively large. Therefore, based on this situation, our staff  need to check regularly and replace the hydraulic oil in time.  

Reason three: when working in a small plastic processing equipment produced noise, so it is possible that the motor blade is damaged, or the pump bearing damage, in areas such as in concentricity deviation under the influence of noise is produced naturally, this requires the staff need to inspect the concentricity, or to replace parts.  

Precautions for the use of plastic processing equipment:

First of all, for the plastic processing equipment that people use now, one part that needs to be remembered is the use of positive and negative poles, because this machine is divided into positive and negative poles. Although people do not need to pay attention to the use of the machine, but the use of the machine installed on other equipment, when changing people’s AC, there are positive and negative. Consumers should remember that the color of the positive and negative poles is different when they are installed and used, which helps consumers to face this problem more seriously.  

Then, plastic processing equipment in use, but also need to pay attention to the use of other metals and other things. It is absolutely important that people avoid many mistakes in order to play an important role in later use. In fact, when people are in control of this aspect, they can also feel it. After all, when they use it improperly, a series of problems will arise, so that they can not operate well.     

The use of plastic processing equipment should not allow other problems to occur in this part, such as charging and switching current at the same time, which has a very big impact on the machine, so the consumers themselves still need to understand.