What about noise generated by plastic processing equipment?

Why is there noise in the production process of plastic processing equipment? In view of this problem, I believe many users are helpless, but don’t worry. Today, we conduct professional analysis on the noise of plastic processing equipment, hoping to provide beneficial reference value to the majority of plastic processing equipment users.

Why does plastic processing equipment produce noise when working?

Reason 1: insufficient hydraulic oil. We should know that if there is not enough hydraulic oil in the oil tank of small plastic processing equipment, the oil pump is easy to absorb external air or absorb some dirt to block the oil pump under working conditions, which is tantamount to adding fuel to the fire, making the oil shortage more serious, and also making the bubbles in the oil have an impact on the blades, Noise will naturally occur. How to solve this situation? We need to check the oil quantity to avoid the entry of air and dirt.

Reason 2: high viscosity. The viscosity referred to here is mainly hydraulic oil. If the viscosity of the hydraulic oil is high, the resistance during the flow process is also relatively large. Therefore, based on this situation, our staff need to detect it regularly and replace the hydraulic oil in time.

Reason 3: if noise is generated when small plastic processing equipment is working, it is likely to be caused by damage to motor blades or oil pump bearings. Under the influence of concentricity deviation, noise will naturally occur, which requires workers to check concentricity or replace parts.

Precautions for use of plastic processing equipment:

First of all, for the plastic processing equipment now used by people, one part that needs to be remembered is the use of positive and negative poles, because this machine has positive and negative poles. Although people don’t need to pay attention to it when using it, there are positive and negative poles when using this machine to install it on other equipment and change people’s AC, Consumers should remember when using. When installing, the colors of the positive and negative electrodes are different, which helps consumers to face this problem more seriously.

Then, when using plastic processing equipment, people should also pay attention to the use of other metals in their own hands. People need to avoid many mistakes so that they can play an important role in later use. This aspect is absolutely important. In fact, people can feel it when controlling this aspect, After all, when you use it improperly, there are a series of problems, so you can’t operate it well.

The use of plastic processing equipment should not cause other problems in this part, such as charging and converting current at the same time, which has a great impact on the machine, so consumers themselves still need to know.

Through today’s introduction, I believe you have a corresponding understanding of how to solve the noise problem of plastic processing equipment. If you encounter problems in the future, you can contact us at any time. The customer service personnel of the company will give you a satisfactory reply. Thank you for your support.