For example, the molding time of a product is 10 seconds with ordinary injection molding machine, while the high-speed injection molding machine uses three axis linkage principle, forming time is greatly reduced by about 6 seconds, minus two small steps, but it improves the time by about half speed.<\/p>\n\n\n\n
environment protection<\/p>\n\n\n\n
Ordinary injection molding machine: the standard pump is adopted, which has great pollution in power, hydraulic oil and noise.<\/p>\n\n\n\n
High speed injection molding machine: oil electric hybrid type with oil pump and servo motor. The advantages of servo hydraulic system are as follows:<\/p>\n\n\n\n
1: the implementation of soft start mold, will not affect the power network, to avoid voltage, radiation pollution.<\/p>\n\n\n\n
2: it can effectively prevent high oil temperature and cool down. Greatly reduce the replacement rate of hydraulic oil.<\/p>\n\n\n\n
3: because of better clicks and power system gear pumps, the servo hydraulic system can greatly reduce the machine running and production noise, and can better improve the working environment.<\/p>\n\n\n\n
energy conservation<\/p>\n\n\n\n
Ordinary injection molding machine: using traditional hydraulic system.<\/p>\n\n\n\n
High speed injection molding machine: the hydraulic servo system can achieve a high energy saving rate of 20% – 80% compared with the traditional hydraulic injection molding machine.<\/p>\n\n\n\n
Thus, compared with the traditional injection molding machine, high-speed injection molding machine has such advantages in high efficiency, energy saving and environmental protection. Therefore, productivity continues to increase in order to increase production.<\/p>\n\n\n\n high efficiencyThe mold…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"aside","meta":{"footnotes":""},"categories":[1],"tags":[28],"class_list":["post-467","post","type-post","status-publish","format-aside","hentry","category-technical","tag-injection-molding-machine","post_format-post-format-aside"],"_links":{"self":[{"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/posts\/467","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/comments?post=467"}],"version-history":[{"count":2,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/posts\/467\/revisions"}],"predecessor-version":[{"id":470,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/posts\/467\/revisions\/470"}],"wp:attachment":[{"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/media?parent=467"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/categories?post=467"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fuhrung.com\/technical-blog\/wp-json\/wp\/v2\/tags?post=467"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"\"](\"https:\/\/www.fuhrung.com\/technical-blog\/wp-content\/uploads\/2022\/03\/0330.jpg\")
<\/figure>\n","protected":false},"excerpt":{"rendered":"