It is not impossible to reduce the operation time of plastic processing equipment
It is very convenient to use plastic processing equipment to process plastic products, which saves a lot of manpower and financial resources, and the quality of the processed plastic products passes the customs, and there is basically no substandard situation. Although it takes a short time for the plastic processing equipment to complete a set of work, the manufacturer still hopes that the operation time can be faster. Can this be done? In fact, it is not impossible to reduce the operation time of plastic processing equipment.
Injection molding period refers to the time required for plastic processing equipment to complete a specific set of actions. Therefore, the action time of each part may affect the whole cycle time. In order to shorten the cycle time and improve production efficiency, each part of the action should be considered separately in order to identify the parts that may shorten the time. In this way, a little time can be saved for each part. Although this saving may be small, when these times are added together, the reduction in time is significant in terms of the percentage of overall reduction.
Empty running time is the time required for the plastic processing equipment to complete a complete cycle when it is empty, that is, there is no plastic in the plastic processing equipment.
Regardless of the size and type of the plastic processing equipment, when you try to change the operation, you should first understand the air operation of the plastic processing equipment. Because it helps injection molders determine whether a particular plastic processing equipment is capable of producing or maintaining high production. Therefore, before trying to reduce the operation time, consider whether the operation time can be reduced in terms of the status, service life and idling time of plastic processing equipment, so as to better suit the remedy to the case.
The cooling time factor of plastic processing equipment is a long part in the injection molding cycle, but it is a part that may be significantly saved. Although it can be calculated, it is usually determined by experience, such as gradually reducing the cooling time until the undeformed injection molded parts are continuously produced. In the cooling stage, it takes enough time to return the screw (sometimes called screw reset or metering time) to refill the plastic in the injection cylinder (place the injection material in the mold again).
Thank you for reading! I believe that after reading the above articles, you will be more professional in the operation of plastic processing equipment in the future. If you need or don’t know anything about the equipment, you can pay attention to our official website or call us, and the company will have special personnel to answer your questions.
Fuhrung provides custom-made service to meet with different customers’ particularized or personalized requirements. All in one, Fuhrung machines can help customers reduce operation cost, improve output, and bring continuing benefits. Meanwhile,FUHRUNG devoted itself to providing turnkey solution of plastic injection moulding.
