To avoid potential risks, the performance debugging of plastic processing equipment should not be underestimated

Before the plastic processing equipment is put into work, first of all, do not forget an important thing, that is, the whole machine debugging work of the equipment. Why is it necessary to debug the device before it works? This is because the debugging work before the work can help us to get familiar with the whole machine, and also check whether the parts of the plastic processing equipment can work normally, but also can find out the potential safety risks in time. 

Working steps for overall performance commissioning of plastic processing equipment:

1. Check the hydraulic oil in the pressure oil tank of plastic processing equipment and the oil level in the oiler to ensure that the supply of hydraulic oil and lubricating oil is sufficient, and note that the oil model must meet the requirements of the manual.

2. Turn on the main power supply of the plastic processing equipment, turn on the main switch on the control box, and set the operation mode selection switch to inching or manual. First jog the plastic processing equipment to check whether the running direction of the oil pump is correct.

3. The plastic processing equipment shall be operated without pressure in the hydraulic system. After starting, adjust the hydraulic system pressure to normal pressure.

4. After the hydraulic pump of the plastic processing equipment works, open the cooling water valve of the oil cooler to cool the return oil to prevent the oil temperature from being too high.

5. After the hydraulic pump works for a short time, close the safety door, manually close the die, open the pressure gauge and observe whether the pressure rises.

• When the vehicle is empty, manually operate the plastic processing equipment for several times, and observe whether the actions of safety door, indicator light and various valves are correct and sensitive.
• Check whether the relay, limit switch, counting device and main stop button of plastic processing equipment work normally, reliably and sensitively.

Plastic processing equipment has stable performance and simple operation of various projects. It is widely used in aerospace, high-speed railway, automotive electronics, urban construction, people’s livelihood and other fields. This train of high-speed precision servo saves energy. Henan plastic processing equipment is equipped with high-precision and sensitive pressure feedback device to form closed-loop precision control and provide customers with good product stability. Compared with the traditional hydraulic press, it shows stronger injection stability, greatly improves the qualification rate of molded products, saves energy and environmental protection, has fast response speed, effectively shortens the cycle and improves production efficiency.

We hope that the steps of the overall performance commissioning of the plastic processing equipment described above can help you. If you want to know more about the equipment, you can call us by our phone, or you can follow our website to learn more relevant information. Of course, we will continue to update it later.